AUTONET TV

U and your U-Joints (Lubricate U-Joints)

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces.

As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer. 

There are signs you can look for that your U-joints need attention.  You may hear a clunk when the gears shift into drive or reverse.  You may feel your vehicle vibrate as you move down the road.  Other signs are leaks at the back of your transmission or a banging sound right before you lose power.  Sometimes, though, if you wait until you notice these symptoms, the U-joints may already be damaged.  

That’s why it’s important that your vehicle’s U-joints be periodically inspected and lubricated.  At the same time, a technician should thoroughly inspect the driveshaft and other connected components.  

Keep your U-joints in good shape, and both of U will continue to enjoy years of reliable transportation.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

Going (Lug) Nuts (Lug Nut Replacement)

Here's a part of your vehicle you probably don't think about much: lug nuts.  They're what fasten your wheels onto your axles.  Pretty important, right? In order to take the wheels off your vehicle to service the brakes, rotate the tires, etc., the lug nuts have to be in good shape so a wrench will grip them tightly. 

Because lug nuts are on your wheels, they are exposed to all the elements of the road (salt, water, grime) and really take a beating. Unfortunately, some manufacturers have made them out of two different metals.  Underneath is the working part of the lug nut, made of steel.  On top is the decorative (the "good looking") part, made out of chrome, stainless steel or aluminum.  After a while, the steel part begins to corrode and expands.  That changes the shape of the outer cap, sometimes rounding off the hexagonal edges and making it hard (if not impossible) to either loosen or tighten the lug nuts since the wrench won't fit any more. 

The reason that's so important is those lug nuts must be functional, especially if you find you have a flat tire somewhere on the road.  If the wheel can't come off to be swapped with a spare, it leaves few options, one of which is your vehicle may have to be towed.  All that for corroded lug nuts!

When you take your vehicle in for service, the technician who works on it keeps an eye on many things, especially if he or she is removing wheels.  It's not unusual for your service advisor to recommend you replace several lug nuts at once since some corrode at a different rate than others. Your repair facility is trying to help you avoid driving a vehicle that has wheels that can't easily be taken off when they need to be.

The good news is there are one-piece lug nuts that don't have the problem the two-piece lug nuts have, so replacing them could eliminate that from happening again any time soon.  And that's not "nuts" at all.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

Don't Be Shocked (Shock Absorbers)

If you've ever ridden down a rough road on your bicycle, you know how hard a ride it can be.  Yet drive down the same road in your car, truck or SUV and it miraculously will smooth out the ride.  That's because it is equipped with shock absorbers.  They are built to dampen impacts from road irregularities.  But after taking hundreds of hits from potholes, railroad tracks and curbs, your shock absorbers can wear out.  Besides the rough ride that can cause, there are other ways your vehicle's performance can be affected.

When it comes to braking for example, you may take a longer distance to stop.  That's because shocks help keep your tires in contact with the surface of the road.  If the shocks aren't working properly, the tires won't make contact like they should.  So when you slam on the brakes, your vehicle will take longer to stop.

Consider what worn out shocks are doing to your tires.  Since the bumps aren't being dampened as much, your tires can bounce up and down more.  That can produce a problem of uneven wear called cupping.

And when you start out from a stop, your vehicle may not have the traction it should since the shocks aren't keeping them down on the road as you accelerate.  If you have front wheel drive, you may lose some steering control on acceleration. Obviously, many of these things involve safety concerns.

Pay attention to any deterioration in your vehicle's ride quality.  If your vehicle is starting to bounce up and down and its ride feels bumpier than before, head on over to your vehicle service facility and get your suspension checked out.  Do the same if steering response isn't as good as it used to be.  Notice that your vehicle nose dives when you brake?  Are your tires wearing in an unusual manner? All are signs that your shocks may be on their last legs.

If the last time you replaced your shocks was 50,000 miles/80,000 kilometers ago, a technician should evaluate them.  Don't be "shocked" if it's time for new ones.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net